The progress and development of society promote the continuous progress of the laser industry, and gradually become an important means of the identification industry. Marking efficiency, clarity, faster and other advantages are known to the public, so in addition to these advantages, laser marking machine can be carved on the metal material 0.3mm deep engraving? Let's learn about it.
In metal materials, laser marking machine is mainly used to mark product serial numbers, production dates, trademarks, etc., as well as engraving three-dimensional patterns, text and so on. For the depth of 0.3mm, it needs to be determined according to the specific metal material and technical parameters. Laser power, scanning speed, pulse width, etc. will affect the laser marking effect. If higher laser power and lower scanning speed are used, a depth of 0.3mm can be achieved on metal materials.
Of course, the core component of the laser marking machine in the depth of the engraving on the metal material is the laser, the size of the laser power directly affects the depth of the material engraving, in principle, the greater the power of the laser engraving the greater the depth. As 19 years of optical research manufacturers tell you that under the premise of not pursuing speed, it is recommended that the depth of laser marking equipment engraving range within 0.5mm, the deeper the depth of engraving, the wider the range, the longer the marking time.
Of course, for softer metal materials, the use of higher laser power and lower scanning speed will be easier to carve. For harder metal materials, higher laser energy and technical parameters are required, and the technical requirements for use are also relatively high, which is difficult to achieve.
In general, the laser marking function on the metal material of 0.3mm depth, is the embodiment of scientific and technological progress, but also the driving force of industrial upgrading. If you have a similar product, you can leave a message on the Xiaobian website or call the Xiaobian.