The assembly steps and working principle of the laser welding machine are explained--网站标题(英文)

Home

Back to list

Jul 18,2023

The assembly steps and working principle of the laser welding machine are explained

Laser welding machine is widely used in industry, powerful, many metal sheets can use this equipment for welding processing, this article mainly shares the working principle of laser welding machine, to facilitate everyone to have a clearer understanding of laser welding equipment, but also for the laser welding machine but do not know how to assemble the user to provide the assembly steps of the laser welding machine.

The working principle of the laser welding machine is based on the laser beam as the heat source, which can quickly weld the material, and use the laser beam to convert the high energy heat source to melt and weld the workpiece surface. Taking the hand-held laser welding machine of LAN speed as an example, the following will explain the assembly steps.

1, first add water to the cooling water tank, pay attention to the green water level of the tank, generally added to the middle area of the water level line; Add the lid can be covered;

2, connect the machine power cord. Ground wire, neutral wire, live wire generally have different colors to distinguish, according to the prompt letter for the corresponding wiring;

3, our laser welding machine is equipped with a wire feeder, at this time also need to wire feeder power line, signal line. For details, please refer to the tutorial video provided by Lansu;

4. Wire feeding machine; After the wire feeder is installed, open the switch of the wire feeder, press the button of the wire feeder, wait for a few minutes, and turn off the wire feeder after the welding wire comes out;

5, install the wire pipe to the welding head;

6. Open the main power switch behind the machine;

7, Insert the key in front of the machine, open the key switch, wait five seconds, press the laser switch, wait for the system to start;

8, click on the screen laser power supply, guide light, swing switch touch button to switch to open state;

9. Connect the protective gas pipe to the machine, click the touch button of the screen blowing test, open the air valve switch, open the air flow to 15-20L/min, click the screen blowing test button, close the blowing test;

10. Test the light with a square tube. Use the ground clamp to hold the product to be welded, the welding head contacts the surface of the product, and press the key to light welding.

11, shut down, first click the screen laser power touch button, press the green laser button, turn off the key switch, turn off the main switch of the power behind the machine.

At the same time, it is also necessary to remind everyone that not every laser welding machine assembly steps are the same, we pay attention to whether the other party provides delivery installation and training services when choosing welding machine manufacturers, so as to avoid after-sales nobody is responsible for delaying production.